What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 01:09

An AC voltage/ current source, and an ac inductive load.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This one hit behind the barn.
Have you ever been physically attacked by a demon?
The third is lightning and “how it gets conducted into a home.”
[old diagram got deleted by accident]
One
Why is only the left side of my vagina bleeding, on and off?
For this case there are devices called Metal oxide varistors (MOV).
Edit 2024–10.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Toyota Industries' shares nosedive on $33 billion buyout deal — steepest fall in 10 months - CNBC
Upvotes:
2024–10–10[John johnson John Johnson ]
The bolt then partially travels down the line to your home.
In schematic diagrams this is the symbol for a fuse:
what exactly is a ‘surge’ protector?
What is lightning?
20-Year Mystery of The Muon's Wiggle May Finally Be Solved - ScienceAlert
This is where this question deviates from being a 'generic' question, and becomes more specific.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Six killed by Israeli gunfire near Gaza aid site, Hamas officials say - BBC
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–16 [ OO OLAOYE OYEBODE ]
It seems Mohan does not understand the difference between a comment and an Answer.
Why do some people dislike Gilmore girls?
There are two important concepts here.
He then describes the function of a fuse.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
but this device (an Inductor) … impedes the rapid changes in the current.
There are three different concepts here that are getting confused.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
He then asserts :
First Sentence:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Are you already having anal sex?
the problem then depends on "how fast does the fuse operate?".
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is your age now, and what age do you prefer to stay at forever?
but I think this circuit , shows a few more pieces.
Here is a simplified AC power diagram.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Why do wives cheat on their loyal husbands?
At least they know the answer if they wanted it.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is 'the assistant's answer'
But it can get overloaded, and no longer works.
(Dc diagram shown, AC is similar).
Barnstars:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, what happens?
He then describes Rainy Season and Lightning.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A circuit breaker is similar, but is resettable.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This device then solves the entire problem.
What does a fuse do?
a photo is worth a thousand words.
It also is a device that limits the change in current flow.
These devices are installed between the “hot” and “neutral” and protective ground.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
I post the exact comment here.
The other is “what does a “fuse” do?”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–14 [Omar Gharbi Omar Gharbi ]
But… the neutral is now “floating” because of the 1 ohm resistance.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
At one ohm, the resistor has a maximum of 1 watt power.
This is where the MOV conducts again, and dissipated the energy.
A fuse is a non-resetable over current circuit protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
nine
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[image of Common-mode choke]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
One is “what exactly is in a ‘surge protector’ ? ”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
These are simplified answers to the original question, and does not change anything I wrote above.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
eight